Chrom-nah NG (Next Generation)

There is a new, high-end product from the R.H. research laboratory:

Chrom-nah NG (Next Generation)
Order No.: 79-1000/5  150 ml
Order No.: 79-1000/1  375 ml

Hints for the professional paint shop for achieving a mirror finish:

1. Chrom-nah NG must be sprayed over a glossy 2 Component lacquer; e.g. 2
Component black lacquer or 2 coat silver metallic (silver base coat lacquer
and 2 Component glossy clear lacquer).

2. In order to achieve a brilliant mirror-finish effect, this 2 Component lacquer
must hard-dry competely. As 2 Component lacquers differ in components and
drying times, you should check the lacquer used in your paint shop before use.
It is crucial to determine the drying time so Chrom-nah NG is not applied too early.

You will find the mirror-finish effect is only moderate when sprayed on 2 Component
lacquer which has only dried for a short period of time (e.g. 30 min. at 60° C), however,
after three days of drying (or 5h at 60° C) the mirror-finish effect is excellent!

3. Do not touch the 2 Component lacquer! Fingerprints or dust cloth traces will show
after drying.

4.  Chrom-nah NG must be sprayed with a 0.5 nozzle at 2 bar injection pressure.
When using a larger nozzle (1.0 max.) the injection must be raised and the lacquer-flow
must be reduced.

5. Let Chrom-nah NG dry for 30 min. at 60° C or overnight.

6.  Seal with 2 Componet clear lacquer.

The clear lacquer finish will diminish the mirror-finish effect slightly, but this cannot
be avoided at this time. Your customer will be thrilled with the brilliant results of a
paint job on, for example, the rims.

P.S.: If you don´t mind the extra effort, you can apply another thin, but full coat of
1 Component water-based clear lacquer (Order No. 79-0040, 250 ml; let dry for 30 min.
at 60° C). This will enhance the mirror-finish effect and add extra shine.

 

Close [X]